Welcome To b2b168.com, Join Free | Sign In
中文(简体) |
中文(繁體) |
Francés |Español |Deutsch |Pусский |
| No.9164606
- Product Categories
- Friendly Links
Information Name: | Supply injection molding finishing me mold how do cheap |
Published: | 2012-11-02 |
Validity: | 365 |
Specifications: | Off for Negotiable |
Quantity: | 500.00 |
Price Description: | |
Detailed Product Description: | Mold appearance, shape and related standards: mold size to meet customer requirements, in line with the customer to specify the injection molding machine Model. 2; customers nameplate production (mold number and weight of the mold, the mold dimensions, making the beginning of time) to install the rivets, position-standard. 3; locating ring size to meet the technical requirements, higher roof 10mm installation to be drowned in the fixed plate, may not be directly attached to the template, use two screws. 4; sprue bush spherical R-standard, the gate sets R> Molding Machine R 5; gate sets and the surface of the flow channel 600 # sandpaper polished to avoid angular. 6; template of the moldbase in the lower-right corner of the day side washed with words marked the mold number; template No. A0, B0; and out of the water mark IN and OUT; connecting pipe mark L; out of the oil mark O IN O OUT; All code complies standards. The mold appearance rotten word arrow "UP" is produced according to customer requirements 7; mold land side install foothold to protect the underside nails instead of special circumstances can refuse. 8; large mold (more than 8 tons), the mold clamping necessitate the creation of a U-shaped groove or perforation, corresponding to the fixed position of the molding machine. 9; surface of moldbase shall not pit, rust, the excess unused rings, and out of the water, gas, oil holes and other defects affect the appearance. 10; moldbase board, holes, edges should be greater than 1.5mm chamfer. Except for special parts. 11; ensure that all rings can spin in the end, lifting balance. 12; install garbage nail ejector plate and ejector plate stroke positioning block to do, not with screws instead. 13; mold stays head area should reach 30% of the the template area after the side legs, hold head higher specific modulus leg, 0.15mm, not interference with the ejection hole. 14; all molds screws shall not be cut short, defects such as slip teeth; over the M12 (with M12) the screws use (12.9). Screws hanging mold material length, more than 1.2 times the diameter of the screw. 15; screws countersunk head hole bottom is flat, the screws can not be higher than the countersunk holes, the end of the plane 1-2MM. 16; weighing more than 10KG parts should accordingly rings hole, the the bail hole size and position in line with standards. Waterways and oil system 17; mold oil line connections meet standards compliant 18 connecting pipe and fittings; smooth mold Fuel and waterways hole, no debris, in line with the requirements of the drawings. 19; mold external plug to be used with thread plug, plug recessed plane 1-2MM faucets models meet the standards or customer requirements, without damage. 20; waterway reliable sealing, no leakage, seepage, etc., for easy maintenance. Affect the flow of hot and cold water shall be left to scrap iron and other waterways, water pressure test the water at 10bar time in more than 30 minutes without leakage. 21; side if the import and export of molds days connector in the day side need to open diversion tank to prevent water flow into the mold inside. Three. Forming part of the 22; the parting surface remains smooth, no dents, rust, no mobile wheel grinding to avoid empty, sealed plastic part free of dents, nicks. 23; scheduled to die and the movable die tendons bit column surface, no fire patterns, marks, polishing place. The 24; Plug part no thin bladed structure, the angle is greater than 2 degrees, not black marks from the thorn defects. 25; cavity of an analog-to-digital products, the case of symmetrical, must be marked with L or R, such as customer location and size requirements are subject to customer requirements, such as customers requirements, should not affect the appearance and assembly plus (such as a font for the "1/8"). 26; identical, similar, easy installation mixed parts marked distinction. 27; big, medium-sized mold according to design requirements increase in the die face pressure balance weight, and nitrogen treatment. 28; surface movable mold insert scheduled to die or fixed mold insert dynamic mode, made the bevel lock or avoid empty. 29; mold, mold and forming part of the material to meet the technical requirements of the mold development. 30; mold products the face engraved characters to customer requirements. The IV. Ejector reset 31; Ejector must be smooth, non-sticking, no abnormal sound, a thimble board reset in the end. 32; thimble, top end-piece is below the surface of the core, and not more than 0.1 mm. 33; ejection mechanism slider interference, if any, must have protective measures, the roof have reset the trip switch. 34; return spring and slider spring standard parts and meet the design requirements, not polished at both ends, cut off; the spring hole bottom is flat, the hole diameter 5mm than spring. 35; the thimble and return pin embryo head shall gaskets, welding, grinding; return pin front end can not welding. 36; surface or bevel on the thimble should be the standard D-type to do anti-rotation positioning, Z-shaped pulling rod should do the anti-rotation positioning. 37; around the top block should be 3-5 degrees slope, the bottom of the chamfer the mandril should be sinking into the top block, reliable fixation. Taizhou Huangyan new visual plastic mold factory is situated in the beautiful and rich East China Sea, has said the reputation of "China mold town" and "hometown of Chinese tangerine" Huangyan. New visual mold is 14 km east of Taizhou Port, 16 km north of Huangyan Airport, three kilometers north near the high-speed exit, and adjacent to the passenger transportation center is only 500 meters. Beautiful environment, economic development, transportation is very convenient. The Cheng Xun plastic mold factory was established in 2010, is a specialist manufacturer of a plastic mold, mold products include: automotive interior and exterior mold, appliances refrigerators air conditioning cleaner mold, commodity mold, battery mold. The Cheng Xun such as the quality of mold requirements, commitment to each customer. From the venture so far, through unremitting efforts, the company has a strong processing capacity and talents, in accordance with the requirements of customers using CAD / CAM / CAE technology for 3D design, drafting, modeling. The plant has imported various advanced processing equipment: coordinate measuring instrument, CNC profiling milling, large precision EDM machine tools, such as high-speed milling, wire cutting, injection molding machines and clamping machines. Professional stylist, sophisticated processing equipment to ensure the high quality of Cheng Xun mold. >> Contact phone: 13456615037 Tel :0576 -89,177,006 Contact: Huangdan mailbox: sale7@nvmould.com QQ: 2,252,695,146 Address: North Industrial Zone, Taizhou Huangyan Kangqiang Road No. 17 |
Admin>>>
You are the 10200 visitor
Copyright © GuangDong ICP No. 10089450, Ou mix ?? Naosuifalu the All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 10200 visitor
Copyright © GuangDong ICP No. 10089450, Ou mix ?? Naosuifalu the All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility